Ford LMC 06 Liberty Start

Gears Manual

 
 
 
 
 
 
Wagi
Newbie
Avatar
Gender: n/a
Age: 76
Posts: 13
Registered: 07 / 2014
Subject:

Ford LMC 06 Liberty Start

 ·  Posted: 28.03.2015  ·  #1
Hi everyone, can someone tell me what is wrong. When engine is running can't engage any gear,but when engine is stopped all gears are fine.Engage any gear when stopped and turn ignition with clutch pressed to floor she jumps. What's up ?. Have plans in place for Easter hope to still go with your help. Many thanks in advance.Cheers
Michelinman
Eat's Sleep's craic
Avatar
Gender:
Location: Maiden City
Age: 74
Homepage: rossdowneyleisures…
Posts: 753
Registered: 11 / 2012
My Motorhome: Autotrail Arapaho
Base Vehicle: Ducato x250 2008
Subject:

Re: Ford LMC 06 Liberty Start

 ·  Posted: 28.03.2015  ·  #2
Have you any free play in your clutch pedal ?. How far have you to press the clutch pedal before you find pressure ?
CHAUSSON
Eat's Sleep's craic
Avatar
Gender:
Location: Tipperary
Posts: 6813
Registered: 02 / 2012
My Motorhome: Knaus Sport Ti 700 UFB Silverline
Base Vehicle: Renault Master 150 dci Quickshift
Subject:

Re: Ford LMC 06 Liberty Start

 ·  Posted: 28.03.2015  ·  #3
Sounds like a seized spigot Bearing!
bigfoot bair
Love's the Craic
Avatar
Gender:
Location: tyrone
Age: 66
Posts: 147
Registered: 02 / 2012
My Motorhome: Hymer 680 starline
Base Vehicle: 2.7 Mercedes 150 bhp
Subject:

clutch

 ·  Posted: 28.03.2015  ·  #4
Could be the clutch plate is stuck to the flywheel how long has it been sitting.
Wagi
Newbie
Avatar
Gender: n/a
Age: 76
Posts: 13
Registered: 07 / 2014
Subject:

Re: Ford LMC 06 Liberty Start

 ·  Posted: 28.03.2015  ·  #5
Hi Michinman, Thanks for reply. No free play in clutch, full pedal pressure. Cheers.
Wagi
Newbie
Avatar
Gender: n/a
Age: 76
Posts: 13
Registered: 07 / 2014
Subject:

Re: Ford LMC 06 Liberty Start

 ·  Posted: 28.03.2015  ·  #6
Hi Chausson Pat, Is spigot bearing anything to do with whiring noise in clutch pedal when gears are changed.
Wagi
Newbie
Avatar
Gender: n/a
Age: 76
Posts: 13
Registered: 07 / 2014
Subject:

Re: Ford LMC 06 Liberty Start

 ·  Posted: 28.03.2015  ·  #7
Hi Bigfoot Bair, Funny you said that.That happened two years ago and new clutch plate was put in. 6 months later whiring noise in clutch pedal when changing gears. Was told could last for years. Now no gears when engine running.
CHAUSSON
Eat's Sleep's craic
Avatar
Gender:
Location: Tipperary
Posts: 6813
Registered: 02 / 2012
My Motorhome: Knaus Sport Ti 700 UFB Silverline
Base Vehicle: Renault Master 150 dci Quickshift
Subject:

Re: Ford LMC 06 Liberty Start

 ·  Posted: 29.03.2015  ·  #8
Quote by Wagi

Hi Chausson Pat, Is spigot bearing anything to do with whiring noise in clutch pedal when gears are changed.


Yes the spigot bearing would be turning when you would press the clutch, so would the release bearing (not even sure if there is a spigot bearing on a transit, some modern vehicles don't have one) If it is a bearing and it sounds like that if it is whining the gearbox will have to be pulled back and the clutch, release bearing, spigot bearing/ bushing if fitted inspected
Michelinman
Eat's Sleep's craic
Avatar
Gender:
Location: Maiden City
Age: 74
Homepage: rossdowneyleisures…
Posts: 753
Registered: 11 / 2012
My Motorhome: Autotrail Arapaho
Base Vehicle: Ducato x250 2008
Subject:

Re: Ford LMC 06 Liberty Start

 ·  Posted: 29.03.2015  ·  #9
I can remember my first Motorhome had the same problem and it was 2 broken pressure plate springs that was causing it, however the gearbox will have to be removed to repair it anyway, so all can be checked then :up:
celtichymer
Craic'er
Avatar
Gender: n/a
Location: Kildare
Age: 56
Posts: 74
Registered: 03 / 2015
Subject:

No gear select

 ·  Posted: 05.04.2015  ·  #10
I had the same symptoms you report on my jeep one morning about a month ago. Most of the Googleing pointed towards the clutch slave cylinder. I pumped the clutch pedal a few times and got it back however it was slowly getting harder to change gear. Got under the vehicle and found the cylinder. Pushed it back and there was no resistance. I pulled back the rubber boot and there was fluid in it (this should be dry). I replaced the cylinder, bled it and it worked a treat.
Selected quotes for multi-quoting:   0

Registered users in this topic

Currently no registered users in this section

The statistic shows who was online during the last 5 minutes. Updated every 90 seconds.