Gas hob won't hold the flame?

Stumped!

 
 
 
 
 
Con910
Craic'er
Avatar
Gender:
Location: Clare
Age: 62
Posts: 81
Registered: 10 / 2021
My Motorhome: Burstner T680 2005
Base Vehicle: Renault
Subject:

Gas hob won't hold the flame?

 · 
Posted: 13.04.2025  ·  #1
'Morning Folks...just a puzzle! Of the 3 gas rings on my hob one will not hold the flame. I have opened it with a T6 x 75 mm and cleaned it thoroughly, the other 2 work and hold the flame just fine. Any ideas and TIA? Con


Thornwood
Craic Addict
Avatar
Gender:
Location: Louth
Age: 69
Posts: 392
Registered: 02 / 2018
My Motorhome: Burstner Harmony Line 700
Base Vehicle: Fiat Ducato
Subject:

Re: Gas hob won't hold the flame?

 · 
Posted: 13.04.2025  ·  #2
Did you try swapping over the burner to see if the problem moves.


Fireguymo
Craic'er
Avatar
Gender: n/a
Location: Dublin
Age: 51
Posts: 20
Registered: 08 / 2020
My Motorhome: Dethleffs Advantage
Base Vehicle: Fiat Ducato
Subject:

Re: Gas hob won't hold the flame?

 · 
Posted: 13.04.2025  ·  #3
I had a similar problem, had a gas fella look at it, said the thermocouple was gone on it. Replaced it for me. Not a big job ...


sprinter
Eat's Sleep's craic
Avatar
Gender:
Location: Co Wicklow
Age: 94
Posts: 7871
Registered: 01 / 2015
My Motorhome: Matilda 2 Pilote 703FP Explorateur
Base Vehicle: 3ltr 318 Sprinter Automatic
Subject:

Gas hob won't hold the flame?

 · 
Posted: 13.04.2025  ·  #4
 

The thermocouple should sit in the flame like this, if not try gently pushing it into the flame, if it is then a reacement is probably required.


Con910
Craic'er
Avatar
Gender:
Location: Clare
Age: 62
Posts: 81
Registered: 10 / 2021
My Motorhome: Burstner T680 2005
Base Vehicle: Renault
Subject:

Bingo!

 · 
Posted: 13.04.2025  ·  #5
I tried lifting the hob after I posted initially and it was tight on one corner so decided not to force it. I went into the burner and wiggled it around and thought..."maybe this will be enough?'..so when I put it all back together she lit and held...magic! thanks y'all?


Selected quotes for multi-quoting:   0