Urgent! Dipstick snapped

Plastic dipstick or maybe a plastic tip ?

My citreon berlingo has 2 down in the sump !
The 1.6 Hdi is common for it.
If its big enough it wont go anywhere Jason, the lift pipe wont let it up.

Its in the sump Jason....As Jon said...It wont go anywhere. The oil pick up tube would have a gauge strainer arrangement on the suction point to filter swarf etc.....It wont end up in your oil ways!!

Edit... If you are paranoid you could try draining oil and see if it comes out....Failing that only option is dropping the sump pan....Not the end of the world to do either way.

I thought this topic was going to be a video of me last night in Fuengirola

My Scudo has 2" tip of the dip stick in the sump aswell, 2.5 years later and no bother ......bate er on

I haven’t replaced the dipstick yet but I did try to dip a rod down the tube to have a look at the oil. It’s a flexible fibreglass type of rod used for chasing cables. But it seems to stop short of the sump which makes me think it’s blocked. I think the original dipstick snapped just short of the full travel of the stick and is now blocking the way. The sump might need to be dropped after all.

Would anyone with a Master/ Movano pre 2010 know, or can measure the dipstick length? EBay is telling me 515mm stick length which can’t be right. The broken dipstick is longer than that. ??