PVC Panel

PVC Panel

 
 
 
 
 
hastings
Craic'er
Avatar
Gender: n/a
Age: 44
Posts: 61
Registered: 08 / 2018
Subject:

PVC Panel

 ·  Posted: 24.09.2019  ·  #1
Good morning all.
I need a small piece of 2mm thick PVC paneling. The type used on the walls of industrial kitchens or cold storage.
I can get it in sheets for 8x4 from England, but delivery is more than the actual sheet of PVC. About £60/70 all in!
I need a piece 510mm x 175mm. Preferable with clean/smooth edges and corners... Can anyone help please?
mad max
Eat's Sleep's craic
Avatar
Gender:
Location: Co Galway
Age: 98
Posts: 5550
Registered: 04 / 2013
My Motorhome:
Base Vehicle:
Subject:

Re: PVC Panel

 ·  Posted: 24.09.2019  ·  #2
Try Quinn Refrigerated vehicles in Athenry co Galway,
They build ambulances and refrigeration truck bodies,
sprinter
Eat's Sleep's craic
Avatar
Gender:
Location: Co Wicklow
Age: 93
Posts: 7698
Registered: 01 / 2015
My Motorhome: Matilda 2 Pilote 703FP Explorateur
Base Vehicle: 3ltr 318 Sprinter Automatic
Subject:

PVC Panel

 ·  Posted: 24.09.2019  ·  #3
Is there a shop sign maker anywhere near you. they use a light laminate that can be cut and shaped with a knife.
hastings
Craic'er
Avatar
Gender: n/a
Age: 44
Posts: 61
Registered: 08 / 2018
Subject:

Re: PVC Panel

 ·  Posted: 24.09.2019  ·  #4
Quote by sprinter

Is there a shop sign maker anywhere near you. they use a light laminate that can be cut and shaped with a knife.


Thank you.
Yes, that's foamex. I got a bit of that. It's pretty good, but not as glossy as the PVC panels.
<BM>
Eat's Sleep's craic
Avatar
Gender: n/a
Location: Dublin
Age: 46
Posts: 987
Registered: 12 / 2016
My Motorhome: Rimor Superbrig
Base Vehicle: Ford Transit
Subject:

Re: PVC Panel

 ·  Posted: 24.09.2019  ·  #5
sprinter
Eat's Sleep's craic
Avatar
Gender:
Location: Co Wicklow
Age: 93
Posts: 7698
Registered: 01 / 2015
My Motorhome: Matilda 2 Pilote 703FP Explorateur
Base Vehicle: 3ltr 318 Sprinter Automatic
Subject:

PVC Panel

 ·  Posted: 24.09.2019  ·  #6
Where are you based? There is s company in Park west Ind east Advanced Flooring they also do wall covering that they heat and bend for showers,
01 6268940.
hastings
Craic'er
Avatar
Gender: n/a
Age: 44
Posts: 61
Registered: 08 / 2018
Subject:

Re: PVC Panel

 ·  Posted: 24.09.2019  ·  #7
Quote by sprinter

Where are you based? There is s company in Park west Ind east Advanced Flooring they also do wall covering that they heat and bend for showers,
01 6268940.


County Louth but travel to Dublin quite often, so I'll try both places.
Thank you
heanorboy
Eat's Sleep's craic
Avatar
Gender:
Location: YATTON, NORTH SOMERSET
Age: 75
Posts: 1443
Registered: 04 / 2013
My Motorhome: Wildax Europa
Base Vehicle: 2015 Renault Master
Subject:

Re: PVC Panel

 ·  Posted: 24.09.2019  ·  #8
Brain not being that good but the otherday we stopped in a car park at Enniscorthy and off the car par was a 3 storry shop that sold everything for the house i.e a hardware store and they definitely did have the bathroom panels got the feeling they maybe had more than one.
Also driving thro Limerick today stopped a Wickes they may have them
David
CHAUSSON
Eat's Sleep's craic
Avatar
Gender:
Location: Tipperary
Posts: 6813
Registered: 02 / 2012
My Motorhome: Knaus Sport Ti 700 UFB Silverline
Base Vehicle: Renault Master 150 dci Quickshift
Subject:

Re: PVC Panel

 ·  Posted: 24.09.2019  ·  #9
Quote by heanorboy

Brain not being that good but the otherday we stopped in a car park at Enniscorthy and off the car par was a 3 storry shop that sold everything for the house i.e a hardware store and they definitely did have the bathroom panels got the feeling they maybe had more than one.
Also driving thro Limerick today stopped a Wickes they may have them
David

Wickes is closed in Limerick for the last year or two.
CHAUSSON
Eat's Sleep's craic
Avatar
Gender:
Location: Tipperary
Posts: 6813
Registered: 02 / 2012
My Motorhome: Knaus Sport Ti 700 UFB Silverline
Base Vehicle: Renault Master 150 dci Quickshift
Subject:

Re: PVC Panel

 ·  Posted: 24.09.2019  ·  #10
I got a 8x4 sheet from this crowd last year and I have a piece left, I will check it out to see if it isn't scratched, could give it to someone in Red Barn next weekend if they are going to Carlingford

https://enviroclad.com/contact/
eirebus
Eat's Sleep's craic
Avatar
Gender:
Location: kildare
Posts: 7585
Registered: 10 / 2011
My Motorhome: Dethleffs Advantage
Base Vehicle: Fiat 2.3
Subject:

Re: PVC Panel

 ·  Posted: 24.09.2019  ·  #11
Quote by CHAUSSON

I got a 8x4 sheet from this crowd last year and I have a piece left, I will check it out to see if it isn't scratched, could give it to someone in Red Barn next weekend if they are going to Carlingford




I can do that if needed
witzend
Eat's Sleep's craic
Avatar
Gender:
Location: Cornwall
Posts: 694
Registered: 08 / 2012
My Motorhome:
Base Vehicle:
Subject:

Re: PVC Panel

 ·  Posted: 24.09.2019  ·  #12
I got a couple of pieces
Kev,Lou & Kids
Craic'er
Avatar
Gender: n/a
Location: Co.Waterford
Age: 55
Posts: 48
Registered: 07 / 2018
My Motorhome: Burstner A535
Base Vehicle: Fiat Ducato
Subject:

Re: PVC Panel

 ·  Posted: 24.09.2019  ·  #13
Quote by hastings

Good morning all.
I need a small piece of 2mm thick PVC paneling. The type used on the walls of industrial kitchens or cold storage.
I can get it in sheets for 8x4 from England, but delivery is more than the actual sheet of PVC. About £60/70 all in!
I need a piece 510mm x 175mm. Preferable with clean/smooth edges and corners... Can anyone help please?


Should have some in the workshop, will check in the morning.
hastings
Craic'er
Avatar
Gender: n/a
Age: 44
Posts: 61
Registered: 08 / 2018
Subject:

Re: PVC Panel

 ·  Posted: 25.09.2019  ·  #14
Quote by eirebus

Quote by CHAUSSON

I got a 8x4 sheet from this crowd last year and I have a piece left, I will check it out to see if it isn't scratched, could give it to someone in Red Barn next weekend if they are going to Carlingford




I can do that if needed


Thank you both.
Does the Carlingford meet start on the Friday or Saturday?
hillton9
Eat's Sleep's craic
Avatar
Gender:
Location: Crossgar
Age: 67
Posts: 2910
Registered: 07 / 2013
My Motorhome: Rollerteam t-line 740
Base Vehicle: Fiat muiltijet
Subject:

Re: PVC Panel

 ·  Posted: 25.09.2019  ·  #15
On the fri 🤪🍺
hastings
Craic'er
Avatar
Gender: n/a
Age: 44
Posts: 61
Registered: 08 / 2018
Subject:

Re: PVC Panel

 ·  Posted: 25.09.2019  ·  #16
Might head down to see what the "craic" is like! I can't stay unfortunately.
eirebus
Eat's Sleep's craic
Avatar
Gender:
Location: kildare
Posts: 7585
Registered: 10 / 2011
My Motorhome: Dethleffs Advantage
Base Vehicle: Fiat 2.3
Subject:

Re: PVC Panel

 ·  Posted: 25.09.2019  ·  #17
@hastings
Have you sourced the pvc yet
hastings
Craic'er
Avatar
Gender: n/a
Age: 44
Posts: 61
Registered: 08 / 2018
Subject:

Re: PVC Panel

 ·  Posted: 25.09.2019  ·  #18
Quote by eirebus

@hastings
Have you sourced the pvc yet


Not really. I can get a 600x600 from Farnell for about €20, but the description doesn't tell me if it's glossy or not.
CHAUSSON
Eat's Sleep's craic
Avatar
Gender:
Location: Tipperary
Posts: 6813
Registered: 02 / 2012
My Motorhome: Knaus Sport Ti 700 UFB Silverline
Base Vehicle: Renault Master 150 dci Quickshift
Subject:

Re: PVC Panel

 ·  Posted: 25.09.2019  ·  #19
Well you can have the bit from me for free, just checked it the protective plastic is still on one side. It is slightly bigger than the size you require, can you cut it to size yourself? I used a metal blade on a jigsaw when I cut the sheet.
Kev,Lou & Kids
Craic'er
Avatar
Gender: n/a
Location: Co.Waterford
Age: 55
Posts: 48
Registered: 07 / 2018
My Motorhome: Burstner A535
Base Vehicle: Fiat Ducato
Subject:

Re: PVC Panel

 ·  Posted: 25.09.2019  ·  #20
I have plenty of offcuts, so if you still need let me know.
hastings
Craic'er
Avatar
Gender: n/a
Age: 44
Posts: 61
Registered: 08 / 2018
Subject:

Re: PVC Panel

 ·  Posted: 26.09.2019  ·  #21
Quote by CHAUSSON

Well you can have the bit from me for free, just checked it the protective plastic is still on one side. It is slightly bigger than the size you require, can you cut it to size yourself? I used a metal blade on a jigsaw when I cut the sheet.

Quote by Kev,Lou & Kids

I have plenty of offcuts, so if you still need let me know.


I appreciate both offers. Many thanks. I'll PM
Selected quotes for multi-quoting:   0

Registered users in this topic

Currently no registered users in this section

The statistic shows who was online during the last 5 minutes. Updated every 90 seconds.